 
|  | 
Full-Metal JackRabbit
Full-Metal JackRabbit
All the features and benefits of the original JackRabbit truck bed cover
come together with the added quality of an all-metal cover to create the
JackRabbit Full Metal. All operation and installation of this new cover is the
same but with the JackRabbit Full-Metal you get the added strength and good
looks of all metal, interlocked, powder coated aluminum panels. JackRabbit
Full-Metal’s weather sealed, low profile Latch-n-Lok™ handle system allows the
cover to be latched every 12 inches. With the Pace Edwards Continuous Tension
Spring™ smooth operation is assured every time you open or close this truck bed
cover cover. Its flush mounted top cover design also provides a sleek low
profile look that enhances the appearance of your truck.
Full-Metal JackRabbit™ Frequently Asked
Questions
How does the Full-Metal JackRabbit work?
The
Full-Metal JackRabbit cover slides along rails mounted to the sides of the truck
bed into a canister at the front of the truck bed. The Full-Metal JackRabbit
blanket rolls around a reel inside the canister with the help of a coil spring
which maintains tension on the cover at all times making it easy to open. The
canister measures 9.6” wide by 9.66” high.
What is the Full-Metal JackRabbit “blanket” made
of?
The Full-Metal JackRabbit is manufactured out of heavy gauge extruded
aluminum panels with a black textured powder coat finish for increased strength
and durability that are fastened together with a patented silicone hinge seal.
Will the cover keep the truck bed dry? What
about ice and snow?
The Full-Metal JackRabbit is designed so that water
collected on the top is carried to the canister. Drain tubes located at the base
of the canister then take the water outside the truck, to help keep your truck
bed dry. Water cannot pass through the top of the cover, however water may
intrude into the bed via components that are not part of the Full-Metal
JackRabbit such as the tailgate, stake pockets, etc. These components require
proper sealing during installation. We do not claim that our covers are 100%
waterproof and have never heard of a competitors cover that is either. Be very
cautious if a manufacturer says that their retractable cover is 100% waterproof.
Snow should be swept off of the cover with a broom before operating the
cover otherwise you will end up with the snow in the truck bed. Ice can be
removed by taking your hand and smacking the cover as close to the middle as
possible this will cause a vibration in the cover that breaks up the ice making
it easy to remove. Do not use anything but your hand for this.
Is the cover hard to install? How long will
installation take?
Installation is easy. All parts are an exact match to your
truck – no cutting necessary! JackRabbit covers are installed with our patented
SpeedClamp™ system on most applications. Installation should take 15 minutes for
the professional and under 30 minutes for a first time installer.
How does the Full-Metal JackRabbit lock?
The
Full-Metal JackRabbit locks with a key Offset to the driver’s side near the
tailgate. The key turns arms that lock into the side rails mounted on the sides
of the truck bed. The Full-Metal JackRabbit can be locked in place at 12 inch
intervals along the truck bed.
Will the cover improve my gas mileage?
How?
Your gas mileage should improve between 7% and 10% on the highway, with
the cover closed on the bed (except when towing). A university study shows
substantial gas mileage improvement whenever the box of a pickup is
covered. Input from customers and our own experience bear out
the accuracy of this claim.
Will the cover work with my bedliner?
The
rails on our cover are designed to fasten directly on the sill of the truck bed.
If you have a bedliner that covers the sill, modification will be required. Most
under-the-rail bedliners are more easily fitted with our cover, but may also
require modification near the front corners. Please call our
Technical Support Reps for information regarding fit with your bedliner.
Is there a warranty on the Full-Metal
JackRabbit?
Yes, there is a three-year factory defect warranty on all parts.
WARRANTY STATEMENT
PACE
EDWARDS (hereinafter referred to as the MFG.) warrants each new Pace Edwards
Bedlocker®, JackRabbit™, Full-Metal-JackRabbit™, and Roll-Top-Cover® retractable
truck bed cover to the original owner
For JackRabbit and Bedlocker
Pace Edwards patented SpeedClamp™ system allows you to install
your tonneau cover easily to the truck with out drilling into the sides of the
bed. These innovative clamps hold the rails securely to the truck yet are small
and attractive looking.
SpeedClamps come standard on most applications.
JackRabbit Series Installation Instructions
Adobe Acrobat Reader is required to view instructions below. 
 JackRabbit
Series Standard Instructions
JR
Series Ford Explorer Sport Trac Installation Instructions
JR
Series Ford Flareside Installation Instructions
JR
Series Ford (2000-2003 Only!) SuperCrew Installation Instructions
JR
Series Nissan Frontier SB Installation Instructions
JR
Series Toyota Tacoma SB Installation Instructions
JR
Series Toyota Tundra Installation Instructions
JR
Colorado/ Canyon Crew Cab XSB Install Instructions
JR
Nissan Frontier Crew Cab XSB Installation Instructions
JR
Toyota Tacoma Crew Cab XSB Installation Instructions
JR
Series Rail Shimming Instructions !VERY IMPORTANT!
2004 Ford
Flareside Clamp Supplement
Nissan
Titan Clamp Instruction
Toyota Clamp
Instruction
JackRabbit
Cargo Light Install Instructions Full-Metal JackRabbit
|
To find your Make, Model and Year, go to the item you are interested in.
Simply select your vehicle from the select drop down box at the bottom of each product page. |
| | |
